 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Oscilent Corporation IF SAW Filter | 813-SL70.0M-09 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL70.0M-09 . TYPE : 13.3 x 6.5mm Low-Loss IF SAW Filter Apr 18, 2007 70.0 MHz SAW Filter Low-Loss 70MHz IF SAW Filter PART NUMBER : 813-SL70.0M-09 FREQUENCY RESPONSE OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.0 dB Bandwidth at -3.0 dB Bandwidth at -35.0 dB Relative Attenuation: from 10 to 64 MHz from 77 to 140 MHz Amplitude Ripple within Fo +/- 3.7MHz Group Delay Variation fo +/-3.7MHz Absolute Delay at Fo Temperature Coefficient 40 40 46 42 0.60 125 0.94 -94 Minimum 69.8 8.4 9.0 Typical 70.0 10.7 50 50 8.66 9.31 11.70 1.0 160 dB dB dBp-p nsec sec ppm/C Maximum 70.2 11.5 13.0 Units MHz dB ohm ohm MHz MHz MHz *With Matching Network (Reference Testing Environment Circuit as shown) Modify Impedance Values as necessary. . Oscilent Corporation IF SAW Filter | 813-SL70.0M-09 Page 2 of 2 PACKAGE OUTLINE (mm) TEST FIXTURE L1 = L2 = 220nH 220nH C1 = 36pF C2 = 68pF Source/Load Impedance = 50 ohms PIN Descriptions: IN-11, OUT-5, GROUND-1,2,3,4,6,7,8,9,10,12 Part No.: 813-SL70.0M-09 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 813-SL700M-09
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |